WL-724/x4

Wireline Grease Seal – Enhanced Corrosive Service

Description:

Lubchem WL-724×4 Honey Oil is enhanced for severe corrosive service. 724×4 contains a superior corrosion protection package that includes a rust inhibitor, a downhole corrosion inhibitor, an H2S scavenger and pH buffers. This combination provides unequaled protection against corrosion in hot, high pressure down-hole environments where exposure to moisture, H2S, CO2 and corrosive acidic fluids occur. This grease is designed specifically for use in oil and gas well logging operations and other wireline applications where a lubricating dynamic seal is required.

Features:

• Enhanced corrosion package
• Hydrocarbon based
• Provides lubrication & sealing
• Minimizes loss of well fluids during operation
• Resistant to H2S & CO2
• Reduces drip and splatter
• Non-conductive
• Custom viscosities available on request

Applications:

WL-724×4 is inhibited for acid gasses and will protect wireline in conditions of 20% CO2 & H2S, high temperature and pressures to 10,000 psi and greater. Lubchem WL-724×4 is recommended for braided wireline, cables and wire rope. It is applied by grease injector control heads and cable lubricators and is available in the following viscosity grades and temperature ranges. Our 700×4 Series is available in 16 visc., 20 visc., 24 visc. and 28 visc.

Properties:

WL-700 Wireline Sprays are designed to protect the complete Wireline from the effects of corrosive chemicals commonly found in oil and gas production. WL-700 Series Iso Grades will protect the braided Wireline or cable against the corrosion effects of acids, caustics, salt water and most chemicals found in downhole operations and can be applied with standard spray equipment commonly found on most wireline service units.

WL-700 Series

WL-700 Series Viscosity Curves